HORNBILL 3000

Hornbill Static switch have different user selectable parameters with DSP control. It is excellent performance enhancement system for useful in Data centers, Process Automation, Power plants, Healthcare, Telecom, broadcasting, Industry type of environment.

TECHNICAL SPECIFICATIONS

MODEL Hornbill 3000
INPUT / OUTPUT
Nominal Voltage Nominal Voltage
Voltage Tolerances +/- 15%
Frequency Tolerances 50 - 60 Hz(Auto selectable)
Power Capacity 63 A | 100 A | 200 A | 300 A
No. of Switching Poles THREE
Overload Capacity 110 % for 1 hour, 150 % for 1 min., 200 % for 10 sec., 1000 % for 100 ms
Duty Continuous
Load Power Factor range 0.2 to unity leading or lagging
Source Voltage Distortion > 10% THD
Controller 32 bit DSP
SWITCH
Transfer < 5 ms
Retransfer < 5 ms
Manual Bypass Provided
ENVIRONMENTAL
Acoustic Noise @ 1m (Ref. ISO 3746) ≤ 55 dBA | ≤ 58 dBA
Operating Temperature 0 to 40° C
Storage Temperature 0 to 70° C
Relative Humidity up to 95% (Non-condensing)
Altitude
PHYSICAL
Enclosure Protection IP – 20
Cooling Forced Air
Color RAL 7016
Cable Entry Bottom
Dimensions 600 x 450 x 1000 | 800 x 500 x 1500
Installation Free standing, floor mounted
USER INTERFACE
Indications Source 1 Healthy, Source 1 Priority, Source 1 Feeding, Source 1 Manual bypass ON, Output ON
Source 2 Healthy, Source 2 Priority, Source 2 Feeding, Source 2 Manual bypass ON, No Sync
Fault Indication Overload
Display 128 x 64 Graphics Display
Metering Source 1 & Source 2 - Voltage, Current, Frequency, Output Voltage, Output Current
Standards 128 x 64 Graphics Display
Communication
Interface & Protocol RS 232
Available Options RS 485 MODBUS, Ethernet connectivity
Specifications are subject to change without prior notice due to constant improvement in design & technology
Custom models available on request